Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Evohome - Fitting HR92 to Chrome Towel Rails?

  1. #11
    Automated Home Guru
    Join Date
    Oct 2016
    Location
    Bath, UK
    Posts
    151

    Default

    Thatís why I mentioned the time itís been installed the temperature is set to 21į and it maintains that temperature perfectly never too cold in the bathroom, so I conclude it is measuring the convected air temperature rather than radiated heat. Honeywell do sell the valves used for the HR92 futying not cheap at £85 but very high quality. It all works.

  2. #12
    Automated Home Legend
    Join Date
    Jul 2014
    Posts
    995

    Default

    Ah right, so a little different than the HR80. In the HR80, the sensor is also on the PCB, but the component legs are kept long to allow the sensor to come up close to the slots in the front, just above the display and below the wheel.
    However in any case, I would have thought with the front of either the HR80 or HR92 facing, what could be, the hottest rod of the radiator wouldn't be a great idea.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •