Evohome app broken

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • keylevel
    Automated Home Jr Member
    • Jan 2019
    • 19

    It's still not working, even though it's supposed to be fixed.

    Controller is working and shows correct temperatures and overrides.

    The app shows the correct temperatures, but does not have the overrides and shows the scheduled temperature for the zones. Closing, logging out and back in does not help.

    Updated to add:

    However, setting a new override using the app (others were set using the controller when the system was down), cancelling it and forcing the app to update means I can now see the "missing" overrides.

    Sounds like some serious design issues in keeping the data synced between the controller, server and app.
    Last edited by keylevel; 22 February 2021, 04:42 PM.

    Comment

    • keylevel
      Automated Home Jr Member
      • Jan 2019
      • 19

      Another strange one.

      The heating for one of my zones did not come on at the scheduled time. Looking at the controller, the clock was more than 40 minutes slow (it was set to automatically update).

      Manually setting the time didn't help either, as the clock then just stayed at the time I set.

      I had to power cycle (and take out the batteries) to get the clock working again.

      Anyone else seen this?

      Comment

      • bruce_miranda
        Automated Home Legend
        • Jul 2014
        • 2307

        The clock running slow is an old bug. But I thought that was fixed in the more recent firmware versions

        Comment

        • keylevel
          Automated Home Jr Member
          • Jan 2019
          • 19

          Thanks.

          Do you know if there a list of the versions somewhere? Does the system update automatically, or does it have to be done manually?

          Comment

          • bruce_miranda
            Automated Home Legend
            • Jul 2014
            • 2307

            It should update automatically but it's often not a bad idea to contact Resideo and get them to push the latest update to you.
            You can see the version you have by clicking Settings, then keep Device Settings pressed until you see the version screen. The latest is 02.00.19.33

            Comment

            • keylevel
              Automated Home Jr Member
              • Jan 2019
              • 19

              Ah, I was wondering where the version information was hidden away!

              Looks like that may be part of the problem - version is shown as 02.00.17.03.

              I'll get in touch and ask for an update to be pushed out.

              Thanks for the help.

              Comment

              • guyank
                Automated Home Sr Member
                • Sep 2015
                • 73

                Is anyone having any problems at the moment? I’m receiving an email every time I try to do a zone or system change. I’m in the middle of moving my automations from SmartThings to Home Assistant and it’s taking me about 30 minutes to get all the overrides cancelled before going to bed. I don’t know whether this is Home Assistant or Honeywell’s servers. I have noticed a couple of instances of the control panel saying it’s not connected to the internet but I’m not having problems with any other appliances.

                Comment

                • Somebody
                  Automated Home Sr Member
                  • Feb 2019
                  • 79

                  Their servers have been playing up for the last day or so. My Domoticz installation has been reporting timeout and other errors all day.

                  Comment

                  • G4RHL
                    Automated Home Legend
                    • Jan 2015
                    • 1580

                    I have found of late that the app is much slower to load in, changes to zones effected on the app are sluggish to complete and over the last few days I have the odd message saying maintenance is being carried out.

                    Comment

                    • gordonb3
                      Automated Home Ninja
                      • Dec 2016
                      • 273

                      Originally posted by G4RHL View Post
                      I have found of late that the app is much slower to load in, changes to zones effected on the app are sluggish to complete and over the last few days I have the odd message saying maintenance is being carried out.
                      Same here. It's been on and off for several days now, random login failures, incorrect zone data, etc. Strangely in-house I appear to have issues as well, with zones sometimes only responding to a new setpoint after up to 30 minutes.

                      Comment

                      • Tigermad
                        Automated Home Sr Member
                        • Nov 2018
                        • 74

                        App broken yet again. Can’t login. This is getting ridiculous now the amount of down time they have had. It’s not just me. It’s all over Twitter again.

                        Comment

                        • Scubajoe
                          Automated Home Sr Member
                          • Nov 2018
                          • 50

                          I've just logged in ok, app seems to be working fine.

                          Comment

                          • G4RHL
                            Automated Home Legend
                            • Jan 2015
                            • 1580

                            Working for me but it is much slower to open and complete any manual adjustments made to a zone temperature.

                            Comment

                            • Tigermad
                              Automated Home Sr Member
                              • Nov 2018
                              • 74

                              Originally posted by G4RHL View Post
                              Working for me but it is much slower to open and complete any manual adjustments made to a zone temperature.
                              Thanks. It is now. It wasn’t earlier. It’s been very slow over the last few days too.

                              Comment

                              Working...
                              X