I've just come across an issue and I'm not sure how new it may be but it's not right regardless.
Our kitchen diner is all open plan and has 2 rad in, both with trvs but are bridged as 1 zone called kitchen (I need 13 zones ideally)
I asked asked alexa "what is the temperature in the kitchen?" and she replied "20 degrees". I could see the trv was currently displaying the set temp of 17.5c. I asked alexa to "make the kitchen warmer" and she said kitchen set to 19 degrees! And here lyes the first issue.
Surely it should set the temp to 1 degree (1 degree is the chosen increment by either amazon or honeywell) warmer than the current actual temp and not the set point as the setpoint is obviously too low hence asking for it to be warmer.
The second issue is even though alexa said it was set to 19 both the trvs and the panel are showing the set point at 18.5! So I asked her to make the kitchen warmer again and she replied setting kitchen to 20 degrees but again trv and panel now show 19.5 degrees.
So why is it not setting the same as stated by alexa and why doesn't it increase the temp above the actual temp and not the set point?
Our kitchen diner is all open plan and has 2 rad in, both with trvs but are bridged as 1 zone called kitchen (I need 13 zones ideally)
I asked asked alexa "what is the temperature in the kitchen?" and she replied "20 degrees". I could see the trv was currently displaying the set temp of 17.5c. I asked alexa to "make the kitchen warmer" and she said kitchen set to 19 degrees! And here lyes the first issue.
Surely it should set the temp to 1 degree (1 degree is the chosen increment by either amazon or honeywell) warmer than the current actual temp and not the set point as the setpoint is obviously too low hence asking for it to be warmer.
The second issue is even though alexa said it was set to 19 both the trvs and the panel are showing the set point at 18.5! So I asked her to make the kitchen warmer again and she replied setting kitchen to 20 degrees but again trv and panel now show 19.5 degrees.
So why is it not setting the same as stated by alexa and why doesn't it increase the temp above the actual temp and not the set point?
Comment