Motion Detecter to turn on lights and appliances

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Milez
    Automated Home Lurker
    • Nov 2005
    • 2

    Motion Detecter to turn on lights and appliances

    Hi,

    I am planning to order the following..

    Wireless Motion Detector.
    Applicane Module
    Wall Dimmer for lights
    Transceiver Module all house version
    Computer Interface usb version.

    I know that the Motion detector can send signals to the Transciever Module, I was wondering if the Transciever can then send those signals to the Computer Interface so that I can then trigger what happends from there. Basicly set up a macro on the pc to turn on lights and appliances if motion is detected.

    Any help would be much appreciated.
    TIA
  • toscal
    Moderator
    • Oct 2005
    • 2061

    #2
    Re: Motion Detecter to turn on lights and appliances

    This is exactly what I have done for a client of mine.
    For example.
    Motion sensor set to C1 and only active at night. If motion is detected at night then a C1 is sent to the transceiver this is picked up by the Ocelot controller which then, checks to see if light B1 is on and if not turns it and then a couple of seconds later it checks to see if B2 is on and if not turns it on. Then a few minutes later if the Ocelot turned either B1 or B2 or both on it will turn off the ones it turned on.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
    Renovation Spain Blog

    Comment

    Working...
    X