Some advice please. I have a issue with the HR92 in my Office (spare bedroom) displaying the room temperature 10-11 degrees higher than it actually is. All controllers are set to 10 degrees for most of the day, effectively not drawing any hot water. On the Touch Controller I can see that all of the other rooms are between 13 - 14.5 degrees BUT the office is showing 23.5 degrees. This is clearly wrong - there has been not heating on in there, same as the rest of the house - and the room feels as cold as the rest of the house. It is a small room (approx 3x3m) and if it really was 23 degrees it would be stifling!
Home Touch.jpg
This clearly causes an issue when I am working from home and set the office to a comfortable 20 degrees - and nothing happens!
I have a spare HR92 (I bought a dozen when I first had the system installed and only use 11 for my other zones). I have swapped out the original for the spare. Unbound the original and bound the spare to the Office zone - but have the same issue.
Any ideas please?
Home Touch.jpg
This clearly causes an issue when I am working from home and set the office to a comfortable 20 degrees - and nothing happens!
I have a spare HR92 (I bought a dozen when I first had the system installed and only use 11 for my other zones). I have swapped out the original for the spare. Unbound the original and bound the spare to the Office zone - but have the same issue.
Any ideas please?
Comment