Results 1 to 2 of 2

Thread: Newish Installation trouble with one HR92

  1. #1
    Automated Home Lurker
    Join Date
    Nov 2018
    Posts
    2

    Default Newish Installation trouble with one HR92

    As above I had a new installation of Evohome in February this year. Itís for heat only. There are 12 zones and each has only one HR92.

    Generally, Iíve been very happy with it. However, the lounge HR92 has now failed twice in the last fortnight. The valve has got 2 bars of battery displayed and it is displaying the temperature scheduled. The radiator and the room are cold. If I turn the dial all the way up to 35C or down to 6C, the motor does not turn. I have removed and reinserted the batteries and rebound and it is working again.

    I had the same problem on two other radiators in the first week and I performed the same procedure. Since then they have worked flawlessly.
    Any ideas?

  2. #2
    Automated Home Lurker
    Join Date
    Nov 2018
    Posts
    2

    Default

    Argh!

    The lights might be on but there isn't necessarily anyone home. I’ve just read the thread currently below mine “Evohome HR92 lights on but not working..”

    and it addresses the same issue.

    I’ll monitor the locking mechanism and switch my brain to maximum before I post again.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •