Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Hr92 92 on all radiators bar plinth heater with opentherm

  1. #11
    Automated Home Jr Member
    Join Date
    Feb 2019
    Posts
    33

    Default

    Decided to fit an Hr92 on my smiths plinth heater,used a Honeywell Valencia straight valve.These were purchased from Richard at the Evohome shop.Straight forward to fit and after a test this morning all seems to be good and working as it should,got this done before winter comes around.Im using the Evotouch as the sensor.My boiler has a fixed speed pump and auto bypass built in so should be ok.

  2. #12
    Automated Home Legend
    Join Date
    Jul 2014
    Posts
    1,307

    Default

    I used to use the feature (bug) a lot during the Summer when the Heating was set to OFF to dry the towels. Spin the knob on the HR valve and the boiler would fire up, even though heating was set to OFF. Can't do that any more and I do miss that.

  3. #13
    Automated Home Legend
    Join Date
    Sep 2014
    Location
    Scotland
    Posts
    2,185

    Default

    Quote Originally Posted by bruce_miranda View Post
    I used to use the feature (bug) a lot during the Summer when the Heating was set to OFF to dry the towels. Spin the knob on the HR valve and the boiler would fire up, even though heating was set to OFF. Can't do that any more and I do miss that.
    Just use custom mode configured to 5C instead of Heating Off.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •