Hi all,
I’ve been running evohome for approximately 12 months and have just added an additional 5 zones to my system, so that is 11 in total - alongside the hot water package.
I purchased the HR91s for my bedrooms purely as they were quieter in operation. As such I have now moved my HR92s downstairs.
Since moving the valves there is one particular valve that is constantly showing a comms fault (currently in the kitchen). An rf check shows a signal strength of 5 and I have bound / cleared / rebound multiple times. This is the valve and not location as I have moved the valve to different areas with the same result.
Saying all this the valve functions perfectly - despite the error.
Granted this is not therefore a major issue; however it is seriously messing with my ocd seeing a red exclamation mark on the controller!
Any ideas for me to resolve this or has the valve partially failed for some reason?
Cheers
I’ve been running evohome for approximately 12 months and have just added an additional 5 zones to my system, so that is 11 in total - alongside the hot water package.
I purchased the HR91s for my bedrooms purely as they were quieter in operation. As such I have now moved my HR92s downstairs.
Since moving the valves there is one particular valve that is constantly showing a comms fault (currently in the kitchen). An rf check shows a signal strength of 5 and I have bound / cleared / rebound multiple times. This is the valve and not location as I have moved the valve to different areas with the same result.
Saying all this the valve functions perfectly - despite the error.
Granted this is not therefore a major issue; however it is seriously messing with my ocd seeing a red exclamation mark on the controller!
Any ideas for me to resolve this or has the valve partially failed for some reason?
Cheers