My Evohome kit was installed some years ago by a local plumber & it was his first installation. Generally things have worked well, however I have one problem.
My home was originally three cottages, the earliest 16th century with 19th & 20th century additions, some double glazing, most walls solid etc...
The living room is 3.5m x 9.5m with two sash windows & a door into the garden on the long side, all single glazed. There are two HR92 controlled radiators one on each elevation, and for some reason, which I forget, when Evohome was installed the living room was configured as two zones East & West. I am using the maximum twelve devices connected to my Evohome Controller, and would like to merge the two zones in the living room into a single zone, and then utilise the freed up zone elsewhere in the house. A few questions:-
Why might the living room have been configured as two zones?
If reconfiguring as a single zone how should I proceed? Would it be sensible to have a Honeywell DTS92E1020 Wireless Digital Room Thermostat (DTS92) in a mid-point in the room?
Thanks in advance.
FB
My home was originally three cottages, the earliest 16th century with 19th & 20th century additions, some double glazing, most walls solid etc...
The living room is 3.5m x 9.5m with two sash windows & a door into the garden on the long side, all single glazed. There are two HR92 controlled radiators one on each elevation, and for some reason, which I forget, when Evohome was installed the living room was configured as two zones East & West. I am using the maximum twelve devices connected to my Evohome Controller, and would like to merge the two zones in the living room into a single zone, and then utilise the freed up zone elsewhere in the house. A few questions:-
Why might the living room have been configured as two zones?
If reconfiguring as a single zone how should I proceed? Would it be sensible to have a Honeywell DTS92E1020 Wireless Digital Room Thermostat (DTS92) in a mid-point in the room?
Thanks in advance.
FB
Comment