Results 1 to 10 of 10

Thread: Ifttt

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Automated Home Jr Member
    Join Date
    Mar 2015
    Posts
    41

    Default Ifttt

    Hi
    I have an Evohome HR92 Thermostat occasionally deciding to change the set point to 35C local overide is disabled.

    Anybody had this problem and how did you fix it, my guess is to invest in another stat also is it possible for me to get a warning text message or email via IFTTT or some other such software when set point is greater than say 20C, if so how? as I have just downloaded IFTTT and it doesnt seem very intuitive.

    Many thanks

    Mick

  2. #2
    Automated Home Legend
    Join Date
    Sep 2014
    Location
    Scotland
    Posts
    2,029

    Default

    Quote Originally Posted by Mickjohn View Post
    Hi
    I have an Evohome HR92 Thermostat occasionally deciding to change the set point to 35C local overide is disabled.

    Anybody had this problem and how did you fix it, my guess is to invest in another stat also is it possible for me to get a warning text message or email via IFTTT or some other such software when set point is greater than say 20C, if so how? as I have just downloaded IFTTT and it doesnt seem very intuitive.

    Many thanks

    Mick
    I would remove and refit the batteries in all battery powered devices in the zone that is suffering from random changes to 35C. I have seen this problem once or twice before and rebooting the HR92's solved the problem.

  3. #3
    Automated Home Legend
    Join Date
    Jul 2014
    Posts
    1,209

    Default

    Domoticz will be able to send you an email if any setpoint goes over xC.

  4. #4
    Automated Home Jr Member
    Join Date
    Mar 2015
    Posts
    41

    Default

    Many thanks I will try your suggestions

    Mick
    Last edited by Mickjohn; 2nd March 2020 at 07:17 AM.

  5. #5
    Automated Home Legend
    Join Date
    Jul 2014
    Posts
    1,209

    Default

    I had published a change to Domoticz that now reads the Controller's fault log. This allows me to get an email notification whenever there is a fault. So much better than reviewing the fault log on the controller every so often looking for new faults. Faults are only displayed on the Controller's main screen, which in a Fault condition. A Restore means that it no longer is displayed and the main screen gives you no hint of a new fault entry on the log. Domoticz notifications solves that 1st world problem.

  6. #6
    Automated Home Jr Member
    Join Date
    Feb 2019
    Posts
    26

    Default

    Although set up, I never receive emails from Domoticz.



    What's the trick, bruce?

  7. #7
    Automated Home Legend
    Join Date
    Jul 2014
    Posts
    1,209

    Default

    Have you made sure that your email is configured and working in Domoticz. Set-Up->Settings->Email : Email Setup. When you click TEST, you should get an email.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •