Page one of this thread lists the new features,you should have received an email that contains the info you require.Lots of info contained within this tread,just need to read through the 68 pages.
Evohome firmware 02.00.19.31 Beta Trial - Exclusive for Automated Home Members
Collapse
X
-
Thanks, I've already read Page 1.
It states:
"After applying for the beta – you will receive a notification from our customer care team stating you have been successful (whilst we are going to try and accommodate everyone, we have to onboard over time). The email will have additional information and insights which will be able to tell you more about the functions and help provide you with a basis to then give feedback if asked. Please give us some reasonable time to respond."
I did not get any email or any additional info - so I'm asking where I find it.
Thanks.
Comment
-
-
Originally posted by Andy the Minion View PostFmb, I was suggesting contacting the Resideo tech support rather than Remeha (no harm in that of course) but Remeha probably won't have much idea what the new Evo features are
Regards AtM
Good one ;-)
Maybe I learn something, but they refer to the installer quite quickly.
I’ll contact Honeywell as well.Last edited by Fmb; 26 November 2020, 09:31 PM.
Comment
-
-
Originally posted by Pbrain View PostThanks, I've already read Page 1.
It states:
"After applying for the beta – you will receive a notification from our customer care team stating you have been successful (whilst we are going to try and accommodate everyone, we have to onboard over time). The email will have additional information and insights which will be able to tell you more about the functions and help provide you with a basis to then give feedback if asked. Please give us some reasonable time to respond."
I did not get any email or any additional info - so I'm asking where I find it.
Thanks.
Comment
-
-
Here is the explanation off the new firmware.
Fastest image hosting platform. Simple minimalistic interface with no ads. Lossless image upload with no compression. No signup required.
Fastest image hosting platform. Simple minimalistic interface with no ads. Lossless image upload with no compression. No signup required.
Fastest image hosting platform. Simple minimalistic interface with no ads. Lossless image upload with no compression. No signup required.
Fastest image hosting platform. Simple minimalistic interface with no ads. Lossless image upload with no compression. No signup required.
Comment
-
-
Anybody else having problems with the cold weather boost function?
This morning our lounge has a temperature of 16.5, with the outside temperature being 6 degrees. Setpoint normally 19, system has boosted to 20. But the heating is not on, radiators are stone cold.
System screen shows BDR at 14%, and the lounge at 30%. Anyone have an idea off what is going on?
I've now turned the boost off to see if that helps.
This isn't a new problem, I've noticed it a few times now, but this is the worst I've seen it.
Comment
-
-
Originally posted by sminkypinky155 View PostAnybody else having problems with the cold weather boost function?
This morning our lounge has a temperature of 16.5, with the outside temperature being 6 degrees. Setpoint normally 19, system has boosted to 20. But the heating is not on, radiators are stone cold.
System screen shows BDR at 14%, and the lounge at 30%. Anyone have an idea off what is going on?
I've now turned the boost off to see if that helps.
This isn't a new problem, I've noticed it a few times now, but this is the worst I've seen it.
I saw a similar problem last week.
Lounge was 1 degree below setpoint (boosted by 1 by cold wwather), no other zones wanted heat. Lounge wanted 100% BDR was 1% nothing happening.
I switched off load scaling (from full)
The lounge get's quite a bit of solar heating on sunny mornings and on those days continues to get heat from the adjacent conservatory.
I suspect load scaling has decided that it doesn't need much input from the boiler to warm it up - tough on a cold winter evening.
Comment
-
Comment