Originally posted by mazzy89
View Post
Evohome firmware 02.00.19.31 Beta Trial - Exclusive for Automated Home Members
Collapse
X
-
Originally posted by mazzy89 View PostShould I maybe reset everything? Please do not tell me so, right yesterday I had to reconfigure everything.
If not, the smart features disappear from the settings menus.
Comment
-
-
Originally posted by DBMandrake View PostAre you sure the device is connected to WiFi/Internet properly, and showing the Internet icon at the top left ?
If not, the smart features disappear from the settings menus.
Comment
-
-
Originally posted by Andy the Minion View PostMazzy, Do you have an outside temp in the top left next to the connected icon? AtM
17cb277c-5b47-42cd-9889-2b06066ee225.jpg
9901b20f-30da-43a5-9746-fb09ddafcd88.jpg
fe148654-82c3-4d81-8659-28b26aee6b8c.jpg
This is my current situation and according all the comments around seems very weird
Comment
-
-
Originally posted by mazzy89 View Post[ATTACH=CONFIG]1682[/ATTACH]
[ATTACH=CONFIG]1683[/ATTACH]
[ATTACH=CONFIG]1684[/ATTACH]
This is my current situation and according all the comments around seems very weird
Comment
-
-
Hi all,
Just enrolled here. Living in the Netherlands and thanks to this forum I got aware of the possibility to get a beta firmware installed with improved Heatpump control.
Since two weeks I am the owner of an hybrid heatpump (Remeha Elga Ace 6kW) and my search for improved “co-operation” between Evohome and a heatpump brought me here.
At the moment I have one question;
The new firmware has the option to add a heatpump, but it won’t allow to connect my BDR91 relais for it. From a (new?) manual of Evohome that I found, I understood I need a BDR91T relais. Seems to make sense, since I would expect that a Heatpump relais should at least have two contacts; one to heat and one to cool.
However I also found this website, from which I understand that from a specific production date on the BDR91 is the same as the BDR91T. Since my BDR91 relais is newer (date code end of 2019), I would expect that it is the same/similar to the BDR91T.
Anyone knows what’s the issue here?
Will there be a new BDR91T relais, or is this an issue for the beta firmware?
Edited: I just found this post as well. This tells there is (or will be) a new relais. Curious when it will be better available.
Comment
-
-
Originally posted by lloyd View PostCheck you have defined your location (address) correctly on the honeywell total connect site - without that it can't produce the weather info.
Comment
-
-
Originally posted by Fmb View PostHi all,
Just enrolled here. Living in the Netherlands and thanks to this forum I got aware of the possibility to get a beta firmware installed with improved Heatpump control.
Since two weeks I am the owner of an hybrid heatpump (Remeha Elga Ace 6kW) and my search for improved “co-operation” between Evohome and a heatpump brought me here.
At the moment I have one question;
The new firmware has the option to add a heatpump, but it won’t allow to connect my BDR91 relais for it. From a (new?) manual of Evohome that I found, I understood I need a BDR91T relais. Seems to make sense, since I would expect that a Heatpump relais should at least have two contacts; one to heat and one to cool.
However I also found this website, from which I understand that from a specific production date on the BDR91 is the same as the BDR91T. Since my BDR91 relais is newer (date code end of 2019), I would expect that it is the same/similar to the BDR91T.
Anyone knows what’s the issue here?
Will there be a new BDR91T relais, or is this an issue for the beta firmware?
Edited: I just found this post as well. This tells there is (or will be) a new relais. Curious when it will be better available.
Regards AtMResideo employee. Comments are personal, and likely to get a hard stare from Rameses
Comment
-
-
Originally posted by Andy the Minion View PostThe BDR91T is available in the Netherlands but only since the new heatpump firmware was released. I would recommend having a conversation with NL tech support as I can't predict how a hybrid heatpump will be controlled internally. It could be Remeha have built a lot of internal logic into the appliance and maybe a simple opentherm connection from Evo is the best option
Regards AtM
Just to be sure I just contacted Remeha myself (by email).
Comment
-
-
Originally posted by Fmb View PostMy installer advised to keep the on/off control, and he contacted Remeha for this.
Just to be sure I just contacted Remeha myself (by email).
Regards AtMResideo employee. Comments are personal, and likely to get a hard stare from Rameses
Comment
-
-
While you're there Andy, any idea when 19.33 is going to go into general release and the Beta testing period will be over ?
We've been beta testing these two beta versions since April now, I think 19.33 is well tested by now...
One reason I ask is that many new Evohome's seem to have been sold with 19.31 pre-installed also quite a few people who were not on the beta program received 19.31 without asking for it and unfortunately 19.31 is very buggy... I'm sure those that have found this forum for help are a small percentage of those who are running 19.31 without realising, so it seems prudent for the much more stable and reliable 19.33 to go out now especially now that winter is here.
Comment
-
-
Hello all, first post on this forum. Signed up for beta a few days ago, and now running 19.33
Question: Is there any documentation available to explain the new features? I have read through the majority of this thread...and have not been able to locate any official documentation. I did not receive an email with any info after I signed up.
Thanks for your help.
P
Comment
-
Comment