Page 66 of 84 FirstFirst ... 1656616263646566676869707176 ... LastLast
Results 651 to 660 of 840

Thread: Evohome firmware 02.00.19.31 Beta Trial - Exclusive for Automated Home Members

  1. #651
    Automated Home Legend
    Join Date
    Sep 2014
    Location
    Scotland
    Posts
    2,287

    Default

    Hang on - is it true that you can't enable load scaling if you don't have an explicit boiler (appliance) control relay ?

    I haven't seen this mentioned before and since the heating relay also does TPI I don't see why this would be the case ?

  2. #652
    Automated Home Lurker
    Join Date
    Nov 2020
    Posts
    9

    Default

    Quote Originally Posted by bruce_miranda View Post
    The orange wires have to be removed from the boiler and not the BDR91. It's the orange wires from the zone valves that are currently firing the boiler. You don't want that to happen.
    Ok thanks, luckily I won't be touching that side of it but at least I can explain to my plumber

  3. #653
    Automated Home Lurker
    Join Date
    Nov 2020
    Posts
    9

    Default

    Quote Originally Posted by DBMandrake View Post
    Hang on - is it true that you can't enable load scaling if you don't have an explicit boiler (appliance) control relay ?

    I haven't seen this mentioned before and since the heating relay also does TPI I don't see why this would be the case ?
    I can't, it did seem odd....

  4. #654
    Automated Home Lurker
    Join Date
    Nov 2020
    Posts
    9

    Default

    Here are the various screens from my controller

    IMG_20201123_162106.jpg
    IMG_20201123_162111.jpg
    IMG_20201123_162122.jpg

  5. #655
    Automated Home Legend
    Join Date
    Jul 2014
    Posts
    1,495

    Default

    I know I will start another debate about the merits or otherwise of having a BDR91 on the main CH zone valve, but one of the reasons I landed up with a spare was because I don't have one on my CH valve, since all the rads are controlled by an HR control. So that is another option to consider, if you actually need to control the CH zone valve. My CH zone valve is just wiring in parallel to my boiler pumps. So it's not latched open but doesn't really operate as a CH zone valve either. And this way, I can still heat up towel rails with no HR controls on them, and frost protect is ensured too.
    Last edited by bruce_miranda; 23rd November 2020 at 05:39 PM.

  6. #656
    Automated Home Jr Member
    Join Date
    Nov 2020
    Posts
    27

    Default

    I've enrolled today. My device out of the box came with 19.31. I wanted to receive 19.33. Then I asked to join the beta but I was downgraded to 17.03. Now waiting to receive the approval message. How long does it usually take?

  7. #657
    Automated Home Jr Member
    Join Date
    Nov 2020
    Posts
    27

    Default

    Seems I got the update right this morning and I'm now at 19.33. How can I get access to the smart feature like the weather one? in the 19.31 i was able to double touch in the left corner and a pop up would appear in the 19.33 this does not happen.

  8. #658
    Automated Home Legend
    Join Date
    Jul 2014
    Posts
    1,495

    Default

    Under Settings, Smart Features

  9. #659
    Automated Home Sr Member
    Join Date
    Oct 2017
    Posts
    99

    Default

    I have held off joining the beta trial, thinking that it would soon be over and we’d get the release version! Also, I’m not a tinkerer any more and like to go for a quiet life. It’s now been 9 months or so, since the beta started and I’m beginning to wonder if I should go for it, it seems pretty robust, from what I can gather.

    Can Andy, or anyone else, give any indication of a likely timeframe for the release version - I suspect the answer will be negative.

    Should I bite the bullet?

  10. #660
    Automated Home Jr Member
    Join Date
    Nov 2020
    Posts
    27

    Default

    Quote Originally Posted by bruce_miranda View Post
    Under Settings, Smart Features
    Unfortunately there is nothing there and I'm running 19.33

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •