Evohome firmware 02.00.19.31 Beta Trial - Exclusive for Automated Home Members

[m112]

Did you actually look at the System Summary screen (via a long press on Settings) on the controller and check what the boiler demand is compared to the room demand.

I've seen 50% demand in a room (and other rooms at lower levels) and the boiler demand is only 3%
Haven't seen this since I disabled Load Scaling.

I've prompted @Atm for a comment a couple of times with no response.

yes, I checked Settings on Evo.

I had a look this evenining too. All rooms dropped 0.5C below the set point and for an hour the boiler didnt fire at all. The boiler demand was 51% this evening but nothing was happening.

Suddenly it woke up with 100% demand.

But tbh I dont know whats worse a bit colder room or a boiler firing every 10min...

[Mid112]

There is an improvement this morning.

Yesterday i switched off warm weather saver.
It appears that it has a priority over cold weather boost.

This morning ive seen livingroom having a weather boost icon and living room and dining to be in setpoint temp at 7am

[oxygen]

Cold Weather and Warm Shutdown are available but Load Scaling is not available for OT.

Well, it seems I don't have it:


Would it be because of the French language ?

The firmware is correctly in 02.00.19.33 in the details. (Wifi is still at the .17 version though).

[bruce_miranda]

You are in the Installer Settings menu. Come out of that and go into the normal User settings menu and its under Smart Features.

[oxygen]

You are in the Installer Settings menu. Come out of that and go into the normal User settings menu and its under Smart Features.

It is still not showing up there 😞
I do have the eco/boost visible, but nothing related to the cold weather boost.
I may need to check if the controller knows my location. My understanding is that the feature requires the location to be known for it to work.

[DBMandrake]

It is still not showing up there ��
I do have the eco/boost visible, but nothing related to the cold weather boost.
I may need to check if the controller knows my location. My understanding is that the feature requires the location to be known for it to work.

Do you have an outdoor temperature shown in the top left ? If not check your location in your TCC account.

[oxygen]

Do you have an outdoor temperature shown in the top left ? If not check your location in your TCC account.

I do have a location set in the TCC account.

But I'm not 100% sure that I have a temp showing up in the main screen (the outdoor temp)
As my controller is 2 stories down, I need to go and have a look at it.
I'll do that during my next telework-break (now you can all live my life )

[oxygen]

So indeed. The controller don't have an outside temperature showing up.
But the controller is linked with the web/application. And the application has a location set, and can show the outside temperature.

Strange.
I may try to disconnect/reconnect to see if it's better :-(

[oxygen]

I have a graphic bug also.
In the optimisation settings, the delayed start is grayed if already active.
If I go in the delayed start to re-select it, then it goes back to normal (non grayed).
If I go back to the main screen and back into the optimisation, it is grayed again.

It's a small bug. Nothing to worry about.
I'll share screens if it is not explicit enough.

[oxygen]

I do have a location set in the TCC account.

But I'm not 100% sure that I have a temp showing up in the main screen (the outdoor temp)
As my controller is 2 stories down, I need to go and have a look at it.
I'll do that during my next telework-break (now you can all live my life )

Disconnecting and reconnecting fixed the issue.
Knowing that I could control the evohome through the API or thought the app proving that it was rightly connected/mapped to my account. It still was missing the outside temperature.
Strange.