Evohome - which zone calling for boiler demand

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • garmcqui
    Automated Home Guru
    • Jan 2015
    • 119

    Evohome - which zone calling for boiler demand

    Hi all, just upgraded my Evohome from the first version to the latest.

    Have set up zones and all is working perfectly. Did I read somewhere that the WiFi version shows you which zone is calling for heat/boiler demand? I haven’t been able to see it yet.

    D2474CE6-FFDB-4576-B9BD-DF497D2E9239.jpg

    Thanks

    Ps: just noticed I need to set the date ��
  • kevinsmart
    Automated Home Ninja
    • Sep 2018
    • 257

    #2
    Hold down the Settings menu for 5 seconds, then press System Summary.

    Comment

    • garmcqui
      Automated Home Guru
      • Jan 2015
      • 119

      #3
      Thanks, but all I get is this?

      BE1E8CEE-AF46-4580-B84D-4D7035CC3213.jpg

      Comment

      • kevinsmart
        Automated Home Ninja
        • Sep 2018
        • 257

        #4
        What version of firmware is running? I think you may need to request an update.

        https://ensupport.getconnected.honeywellhome.com/s/article/How-to-check-the-firmware-on-the-evohome-WIFI-controller?language=en_US
        Last edited by kevinsmart; 5 October 2020, 08:52 AM.

        Comment

        • anniesboy
          Automated Home Sr Member
          • Aug 2019
          • 71

          #5
          Have you got a radiator valve on your hallway? Or is this effecting your display

          Comment

          • garmcqui
            Automated Home Guru
            • Jan 2015
            • 119

            #6
            Originally posted by anniesboy View Post
            Have you got a radiator valve on your hallway? Or is this effecting your display

            https://www.youtube.com/watch?v=L_1fHEOo3hM
            Yes, HR92 on radiator in hallway. But using the evotouch (which is mounted on wall in hallway) as sensor. Is that not ok? I’m not using the HR92 as sensor in many rooms, just actuator. Most rooms have a Y87RF or a DT92 as sensor.

            Thanks
            Last edited by garmcqui; 5 October 2020, 10:29 AM.

            Comment

            • garmcqui
              Automated Home Guru
              • Jan 2015
              • 119

              #7
              Originally posted by kevinsmart View Post
              What version of firmware is running? I think you may need to request an update.

              https://ensupport.getconnected.honey...language=en_US

              Application version: 02.00.11.21

              WiFi Software Version: 02.00.17.00

              Thanks

              Comment

              • DBMandrake
                Automated Home Legend
                • Sep 2014
                • 2361

                #8
                Originally posted by garmcqui View Post
                Application version: 02.00.11.21

                WiFi Software Version: 02.00.17.00

                Thanks
                That's a very old firmware version now.

                If it is connected to the internet and added to your total connect comfort account it should in theory update automatically to the latest public release, which does include the heat demand display. (Might take a few days)

                Earlier you showed the time was wrong and did not automatically set itself - is this still the case ? If so that would suggest it doesn't have a properly working internet connection, so check your WiFi settings.

                If the connection seems to be working fine you could email Honeywell and ask for the firmware update to be manually pushed to the device.

                Comment

                • garmcqui
                  Automated Home Guru
                  • Jan 2015
                  • 119

                  #9
                  No, I did notice that the clock/date hadn’t updated automatically. But then the device reports that it’s connected ok, and the iOS app works fine with it?

                  Maybe I’ll get in touch with Honeywell and see what they say. Alternatively, are they still accepting applications for the beta? Thanks

                  Comment

                  Working...
                  X