Evohome - which zone calling for boiler demand

[garmcqui]

Hi all, just upgraded my Evohome from the first version to the latest.

Have set up zones and all is working perfectly. Did I read somewhere that the WiFi version shows you which zone is calling for heat/boiler demand? I haven’t been able to see it yet.

D2474CE6-FFDB-4576-B9BD-DF497D2E9239.jpg

Thanks

Ps: just noticed I need to set the date ��

[kevinsmart]

Hold down the Settings menu for 5 seconds, then press System Summary.

[garmcqui]

Thanks, but all I get is this?

BE1E8CEE-AF46-4580-B84D-4D7035CC3213.jpg

[kevinsmart]

What version of firmware is running? I think you may need to request an update.

https://ensupport.getconnected.honeywellhome.com/s/article/How-to-check-the-firmware-on-the-evohome-WIFI-controller?language=en_US

[anniesboy]

Have you got a radiator valve on your hallway? Or is this effecting your display

https://www.youtube.com/watch?v=L_1fHEOo3hM

[garmcqui]

Have you got a radiator valve on your hallway? Or is this effecting your display

https://www.youtube.com/watch?v=L_1fHEOo3hM

Yes, HR92 on radiator in hallway. But using the evotouch (which is mounted on wall in hallway) as sensor. Is that not ok? I’m not using the HR92 as sensor in many rooms, just actuator. Most rooms have a Y87RF or a DT92 as sensor.

Thanks

[garmcqui]

What version of firmware is running? I think you may need to request an update.

https://ensupport.getconnected.honey...language=en_US

Application version: 02.00.11.21

WiFi Software Version: 02.00.17.00

Thanks

[DBMandrake]

Application version: 02.00.11.21

WiFi Software Version: 02.00.17.00

Thanks

That's a very old firmware version now.

If it is connected to the internet and added to your total connect comfort account it should in theory update automatically to the latest public release, which does include the heat demand display. (Might take a few days)

Earlier you showed the time was wrong and did not automatically set itself - is this still the case ? If so that would suggest it doesn't have a properly working internet connection, so check your WiFi settings.

If the connection seems to be working fine you could email Honeywell and ask for the firmware update to be manually pushed to the device.

[garmcqui]

No, I did notice that the clock/date hadn’t updated automatically. But then the device reports that it’s connected ok, and the iOS app works fine with it?

Maybe I’ll get in touch with Honeywell and see what they say. Alternatively, are they still accepting applications for the beta? Thanks