-
26th October 2020, 11:28 AM
#1
Automated Home Jr Member
Evohome EU vs. UK compatibility
I have two Evohome installations in two locations - one in the UK with UK kit and one in The Netherlands with EU kit. Both are older style setups with the Evohome gateway.
Both are working fine, but I have not been able to get a UK radiator valve (HR92UK) to work on the EU system. Is this by design?
The valve can be registered fine, receives a room name and appears on a wireless signal check. However, the controller continues to say "waiting for sync" forever even though the wireless signal check always come up good.
Is there any way to overcome this, or is it a fatal bug?
-
26th October 2020, 03:57 PM
#2
Automated Home Ninja
I have several UK type HR92s (ordered deliberately because of the reversed display) running with my EU spec base kit, so I'm sure they are fully compatible. If this is a re-used module you could try a reset: https://ensupport.getconnected.honey...fault-settings
-
27th October 2020, 03:10 PM
#3
Automated Home Jr Member
Thanks Gordon. I will try a reset and/or another HR92.
-
30th October 2020, 01:16 AM
#4
Automated Home Legend
And I have the reverse. I have a few EU style ones paired with a UK system. It works fine.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules