On a Evohome system, in multiroom mode, what temperature is displayed on the controller? The first bound device, an average of the bound devices, or something else?
On a Evohome system, in multiroom mode, what temperature is displayed on the controller? The first bound device, an average of the bound devices, or something else?
I don't think any of the previous respondents understood the question.
In multi-room zones the displayed temperature on the controller is the first bound device in the zone. In other words the device that would be the sensor for the entire zone if you switched the zone back to single room mode. (You can in fact switch zones between single and multi-room mode and back without doing any rebinding as its just a "mode" flag in the data periodically sent to the HR92's every few minutes...)
Last edited by DBMandrake; 29th October 2020 at 11:29 AM.
Ah, I understand now, I think. Yes the first bound room appears first and the rest follow in sequence but you can change the display order in Settings.
No he's talking about multi-room zones.
A multi-room zone is one where all HR92's in the zone measure their own temperature independently to adjust their own radiator vs the default single room zone where there is only one temperature sensor (the first bound device) that controls all the HR92's in the zone.
Multi-room zones behave differently to single room zones in a number of ways.