As part of me catching up with the latest Evohome I have a question.
Ever since installing the new Evohome controller I notice that one of my zones gets a higher setpoint than necessary. This zone is a hallway, with a small radiator, that is set for 18C during the day and evening, and 15C during the night.
Every morning during warming-up the setpoint of this zone is set to 23C. Temperature then runs up quickly and the setpoint is adjusted to 18C. The temperature itself overshoots just a little, but I don't understand why Evohome selects a 23C setpoint when it only needs 18C. None of my other zones show this behavior, even when they have to warm up 2C they set the setpoint at the desired temperature.
I already reinstalled the zone (deleted the zone, cleared the HR92 and re-learned it) but that did not change anything.
Is this normal?
setpoint overshoot.jpg
Ever since installing the new Evohome controller I notice that one of my zones gets a higher setpoint than necessary. This zone is a hallway, with a small radiator, that is set for 18C during the day and evening, and 15C during the night.
Every morning during warming-up the setpoint of this zone is set to 23C. Temperature then runs up quickly and the setpoint is adjusted to 18C. The temperature itself overshoots just a little, but I don't understand why Evohome selects a 23C setpoint when it only needs 18C. None of my other zones show this behavior, even when they have to warm up 2C they set the setpoint at the desired temperature.
I already reinstalled the zone (deleted the zone, cleared the HR92 and re-learned it) but that did not change anything.
Is this normal?
setpoint overshoot.jpg
Comment