New to the forum - long time lurker whilst I gathered advice & finally took he plunge last week for an Evohome setup.
Install has gone smoothly & all set up, however having one issue with the HR91 heads where the trvs don't seem to open fully (all Danfoss RAs C2's) meaning very little heat is coming through (if at all). When I remove the head, the rotating assembly can be unscrewed 1 turn, which then fully opens the valve & water can be heard flowing. WHen I replace it, I can hear it do the calibrate thing, but the problem persists.
Anyone had anything similar or have any advice/thoughts?
Install has gone smoothly & all set up, however having one issue with the HR91 heads where the trvs don't seem to open fully (all Danfoss RAs C2's) meaning very little heat is coming through (if at all). When I remove the head, the rotating assembly can be unscrewed 1 turn, which then fully opens the valve & water can be heard flowing. WHen I replace it, I can hear it do the calibrate thing, but the problem persists.
Anyone had anything similar or have any advice/thoughts?
Comment