Results 1 to 2 of 2

Thread: Toggle desired VS actual temperature on Honeywell DTS92E1020

  1. #1
    Automated Home Guru
    Join Date
    May 2017

    Default Toggle desired VS actual temperature on Honeywell DTS92E1020

    I have one of these:


    Is there an easy way to toggle whether the display shows the current or programmed temperature? Every time I press a button, I seem to set an override which I struggle to clear on the main app.

  2. #2
    Automated Home Legend
    Join Date
    Sep 2014


    As far as I know they always report measured temperature and there isn't an option to display set point instead.

    However a single press then release of the up or down button will show the set point and will not change it. You have to press a second time while the set point value is visible and flashing to make a change.
    Last edited by DBMandrake; 15th December 2020 at 09:24 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts