Toggle desired VS actual temperature on Honeywell DTS92E1020

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • MrBoy
    Automated Home Guru
    • May 2017
    • 165

    Toggle desired VS actual temperature on Honeywell DTS92E1020

    I have one of these:

    honeywell-dts92e1020-wireless-digital-room-thermostat-dts92.jpg

    Is there an easy way to toggle whether the display shows the current or programmed temperature? Every time I press a button, I seem to set an override which I struggle to clear on the main app.
  • DBMandrake
    Automated Home Legend
    • Sep 2014
    • 2361

    #2
    As far as I know they always report measured temperature and there isn't an option to display set point instead.

    However a single press then release of the up or down button will show the set point and will not change it. You have to press a second time while the set point value is visible and flashing to make a change.
    Last edited by DBMandrake; 15 December 2020, 10:24 AM.

    Comment

    Working...
    X