Visonic Powermax+ - an X-10 related problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • MBA
    Automated Home Lurker
    • Dec 2005
    • 2

    Visonic Powermax+ - an X-10 related problem

    Hi everyone, my first post!

    I have a Visonic Powermax+, which has been fine so far. I've just extended it to X10 control with an interface unit and 1 Appliance Module (AM). My problem is I can control the AM perfectly, but can't switch the socket on the interface unit (PGM output).

    Any ideas? :cry:
  • toscal
    Moderator
    • Oct 2005
    • 2061

    #2
    Re: Visonic Powermax+ - an X-10 related problem

    As far as I am aware, well on my CM11 and XM10, the X10 interface unit has no switchable socket, so its permanently on.
    What interface unit are you using.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
    Renovation Spain Blog

    Comment

    • MBA
      Automated Home Lurker
      • Dec 2005
      • 2

      #3
      Re: Visonic Powermax+ - an X-10 related problem

      Its a "Powerhouse XM10U" module.

      Comment

      • toscal
        Moderator
        • Oct 2005
        • 2061

        #4
        Re: Visonic Powermax+ - an X-10 related problem

        The X10U is basically the same as the X10E. E stands for european version and U for UK version. It has no controllable socket, so the socket is always on.
        IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
        Renovation Spain Blog

        Comment

        Working...
        X