Results 1 to 3 of 3

Thread: Help setting up a DTS92e to evohome system

  1. #1
    Automated Home Jr Member
    Join Date
    Nov 2020
    Posts
    41

    Default Help setting up a DTS92e to evohome system

    Hi, Just got a DTS92E for my evohome system to help control the dining room temperature.
    Just now I only have HR92 rad valves fitted in every room along with the main controller in the living room and it all works.
    How do I connect the DTS92E into to the system so that it controls the dining room temperature with an HR92 fitted to the radiator.
    I have gone through trying to set it up but cannot seem to do it.

    Any help welcome

    Bill

  2. #2
    Automated Home Legend
    Join Date
    Sep 2014
    Location
    Scotland
    Posts
    2,322

    Default

    Long press on settings -> Zone configuration -> choose your zone for the DTS92E -> Temperature sensor -> Remote sensor, then follow the instructions to complete the binding.

    The binding button sequence on the DTS92E is kinda odd so make sure you've got the instructions for that handy.

    No need to rebind the HR92's if you use the Temperature sensor option.

  3. #3
    Automated Home Jr Member
    Join Date
    Nov 2020
    Posts
    41

    Default

    Thanks, think I have sorted it now.
    I just removed the room/zone and then set it up again.
    They all seem to work, just need to see if the radiator stays hot until the DTS91E is reading the temperature set for the room.

    Bill

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •