Help setting up a DTS92e to evohome system

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Billywizzo
    Automated Home Jr Member
    • Nov 2020
    • 48

    Help setting up a DTS92e to evohome system

    Hi, Just got a DTS92E for my evohome system to help control the dining room temperature.
    Just now I only have HR92 rad valves fitted in every room along with the main controller in the living room and it all works.
    How do I connect the DTS92E into to the system so that it controls the dining room temperature with an HR92 fitted to the radiator.
    I have gone through trying to set it up but cannot seem to do it.

    Any help welcome

    Bill
  • DBMandrake
    Automated Home Legend
    • Sep 2014
    • 2361

    #2
    Long press on settings -> Zone configuration -> choose your zone for the DTS92E -> Temperature sensor -> Remote sensor, then follow the instructions to complete the binding.

    The binding button sequence on the DTS92E is kinda odd so make sure you've got the instructions for that handy.

    No need to rebind the HR92's if you use the Temperature sensor option.

    Comment

    • Billywizzo
      Automated Home Jr Member
      • Nov 2020
      • 48

      #3
      Thanks, think I have sorted it now.
      I just removed the room/zone and then set it up again.
      They all seem to work, just need to see if the radiator stays hot until the DTS91E is reading the temperature set for the room.

      Bill

      Comment

      Working...
      X