Results 1 to 3 of 3

Thread: DT92E wireless thermostat and new Evohome Firmware

  1. #1
    Automated Home Jr Member
    Join Date
    Jan 2015
    Posts
    22

    Default DT92E wireless thermostat and new Evohome Firmware

    Like most people we have switched our heating back on with the recent cold weather.
    I have a couple of DT92E wireless thermostatís which I have noticed an issue with since the firmware was updated on our Evohome controller.
    We often use the Eco mode on the DT92E which we found is ideal for just turning a rad on for an hour or two for a quick heating boost. An added benefit is if we forget to turn the rad back down the ECO mode switches things back after the preset time.
    At the moment when we use the eco mode by pressing the green button on the DT92E the temperature is set to 19 degrees and the flame indicator appears with the timer counting down as normal. On the Evohome controller the room shows that this has been accepted. A few minutes later the Evohome controller has switched the temperature back to its previous set point but the little timer clock is still showing. Checking the DT92E it shows ECO mode still running and the timer counting down.
    I have tried this several times but it just wonít work anymore as it did previously.
    Is there something I have missed that I need to change to get this working again.
    Thanks
    John

  2. #2
    Automated Home Legend
    Join Date
    Sep 2014
    Location
    Scotland
    Posts
    2,321

    Default

    Could be related to this:

    https://www.automatedhome.co.uk/vbul...de-been-broken

    Are you using the Eco button on the DTS92 by itself, or is system wide Eco mode activated as well?

  3. #3
    Automated Home Jr Member
    Join Date
    Jan 2015
    Posts
    22

    Default

    Quote Originally Posted by DBMandrake View Post
    Could be related to this:

    https://www.automatedhome.co.uk/vbul...de-been-broken

    Are you using the Eco button on the DTS92 by itself, or is system wide Eco mode activated as well?
    Thank you for pointing the other thread out to me.
    We are using the ECO button on the DTS92 as we have always done previously.
    System is running in Normal Mode.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •