Hi
Any help with the following would be much appreciated.
I have Evohome running 8 rads 7 of which have HR92's fitted. I have recently upgraded my boiler to an Ideal Vougue Max 32Kw Combi and replaced the old BDR91 with the Opentherm bridge R8810A1018.
I also have an RFBee UARTBee listening to to radio traffic connected to Domoticz ( thanks to Bruce_Miranda for supplying ).
Since the Opentherm bridge was installed the RFBee UARTBee see's a lot more radio traffic. Two of the extra items showing up in Domoticz were Flow Temperature and Return Temperature which I found very useful
This worked well for 6 weeks after install then sudenly I have lost the flow temperature and return temperature in Domoticz.
The boiler is still showing me the flow and return temps on its display.
I have deleted the installation on Domoticx and reinstalled but flow and return temps are still missing.
Anybody got any suggestions as to how I could see the flow and return temperatures again?
Many thanks
Mick
Any help with the following would be much appreciated.
I have Evohome running 8 rads 7 of which have HR92's fitted. I have recently upgraded my boiler to an Ideal Vougue Max 32Kw Combi and replaced the old BDR91 with the Opentherm bridge R8810A1018.
I also have an RFBee UARTBee listening to to radio traffic connected to Domoticz ( thanks to Bruce_Miranda for supplying ).
Since the Opentherm bridge was installed the RFBee UARTBee see's a lot more radio traffic. Two of the extra items showing up in Domoticz were Flow Temperature and Return Temperature which I found very useful
This worked well for 6 weeks after install then sudenly I have lost the flow temperature and return temperature in Domoticz.
The boiler is still showing me the flow and return temps on its display.
I have deleted the installation on Domoticx and reinstalled but flow and return temps are still missing.
Anybody got any suggestions as to how I could see the flow and return temperatures again?
Many thanks
Mick
Comment