Hi, we are looking to install solar and have Evohome installed with the hot water kit. I was wondering if anyone has done this and how they integrated it to work well. We have also looked at adding a Solar Diverter (My Energi Eddie) so that any excess energy will heat the hot water cylinder. The problem (or not) is that the diverter also needs to read the temp of the cylinder and it uses a PT1000 sensor which i think is the same as Honeywell, could i link the sensor to both devices so they can both read the temp, i dont want the diverter heating the cylinder when i could send it to a battery.
I hope all of that makes sense.
Thanks
Mark
I hope all of that makes sense.
Thanks
Mark
Comment