Results 1 to 4 of 4

Thread: Evohome DHW Kit - where to fit temperature probe?

  1. #1
    Automated Home Guru
    Join Date
    Jan 2015
    Posts
    119

    Default Evohome DHW Kit - where to fit temperature probe?

    Hi all, looking to add an evohome hot water kit to our existing unvented cylinder. The electrics side of things is ok, but Im struggling to find anywhere to put the thermal probe, as the cylinder only has one pocket and that is occupied by the existing dual thermostat.

    Cylinder was only added a few months ago, so if there any way to avoid having to cut into the insulation, Id rather do so if possible.

    Any help appreciated.

    G

  2. #2
    Automated Home Guru
    Join Date
    Jan 2015
    Posts
    119

    Default

    Has anybody swapped the relatively chunky evohome DHW probs for a smaller NTC thermistor like these?

    https://www.ebay.co.uk/itm/122775246996

    If yes, how did you connect the wires etc, as they only come with a 75mm fly lead. Cheers

  3. #3
    Automated Home Legend
    Join Date
    Jul 2014
    Posts
    1,764

    Default

    I have a single pocket too, and just pushed my evohome sensor into the same pocket. Seemed to fit even with the wires of the previous sensor and Evohome is happy.

  4. #4
    Automated Home Sr Member
    Join Date
    Oct 2020
    Posts
    90

    Default

    Quote Originally Posted by bruce_miranda View Post
    I have a single pocket too, and just pushed my evohome sensor into the same pocket. Seemed to fit even with the wires of the previous sensor and Evohome is happy.
    Same for me.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •