Results 1 to 1 of 1

Thread: Help with AV-L9CBE Auto valve

  1. #1
    Automated Home Lurker
    Join Date
    Sep 2022
    Location
    Whitehaven Cumbria
    Posts
    1

    Default Help with AV-L9CBE Auto valve

    recently bought an auto valve and I can't work out how to wire it up, I have several auto valves of a different type used to automate a home brew kit, but this one has me stumped.



    The valve came from www.actuation.co.uk



    The drawing on the side of the autovalve is like this





    Auto valve.jpg



    I hope that makes sense, so what I'm seeing here is that I attach + to 1 then - to 3 and the drive opens the valve then if I attach 4 the drive closes, if I then remove 4 the drive opens, so I'm trying to control 4 with an SSR via an arduino when I use an SSR the valve opens then stays open ( or closed ) until I turn off the power and re start the valve then it operates as normal again until its fully open or closed then it stays open / closed again until the power is removed again, I know I've wired some thing wrong I cant work out what.



    any advice would be gratefully accepted

    Thanks in advance

    Pesh
    Last edited by Pesho77; 26th October 2022 at 02:48 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •