Results 1 to 3 of 3

Thread: rs232 to ethernet

  1. #1
    Automated Home Guru Wexfordman's Avatar
    Join Date
    Nov 2005
    Posts
    118

    Default rs232 to ethernet

    Hi,

    Wondering if anyone had any ideas on connecting an rs232 device to my pc via lan ? Basically I have my HV and comfort located in node 0, and want to cable back to my pc, but I also have a lan port next to hv adn comfort, so was thinking that if i can get a reasonably priced rs232 to lan converter, I could do it a lot easier ?

    Regards,
    Eamon

  2. #2
    Automated Home Guru FrankMcAlinden's Avatar
    Join Date
    Feb 2004
    Location
    Melbourne Australia
    Posts
    109

    Default Re: rs232 to ethernet

    Hi Eamon

    I use the mss100 device and have around seven installed in my setup ...one is connected to Homevision and theu work quite well........check out the link
    these are 2nd hand units ....

    http://tinyurl.com/gten3

    HTH
    Frank
    Home of FirM - the Multi Zone IR Transport System
    http://www.armaghelectrical.com.au/index.html

  3. #3
    Automated Home Guru Wexfordman's Avatar
    Join Date
    Nov 2005
    Posts
    118

    Default Re: rs232 to ethernet

    Thanks Frank,

    Just ordered one to try it out. Should work by the looks of it and then I'll get the second one. Nice price compared to other units I looked at at over 200 dollars!!

    Regards,
    Eamon

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •