I purchased the wire LM12W to control some wall lights I recently wired to my living room (3 lights @ 50W each)
I wired it in parallel to my dimmer in the living room. This means I can turn on/off with the dimmer, and turn on/off with x10 (marmitek remote), but have to have one in the off position at all times to have full control.
I wired up, plugged in my TM13AH tranceiver module within range of remote and tested.
The lights would turn on/off via the remote, and dim... but after about a minute of playing around, the whole thing would freeze up, i would usually have to unplug the tranceiver and come back to it in about 1/2 hour to turn the light off....
I dont have a clue how to fix this... One thing to note is that the wired LM12W is on the lighting wiring, that is not on a ring main loop, and the TM13AH is on the Socket ring main loop that returns to the consumer unit.
Any help appreciated...
I wired it in parallel to my dimmer in the living room. This means I can turn on/off with the dimmer, and turn on/off with x10 (marmitek remote), but have to have one in the off position at all times to have full control.
I wired up, plugged in my TM13AH tranceiver module within range of remote and tested.
The lights would turn on/off via the remote, and dim... but after about a minute of playing around, the whole thing would freeze up, i would usually have to unplug the tranceiver and come back to it in about 1/2 hour to turn the light off....
I dont have a clue how to fix this... One thing to note is that the wired LM12W is on the lighting wiring, that is not on a ring main loop, and the TM13AH is on the Socket ring main loop that returns to the consumer unit.
Any help appreciated...
Comment