clipsal C-BUS Wireless-NEO which switch please ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • michael_jenny
    Automated Home Lurker
    • Jul 2006
    • 1

    clipsal C-BUS Wireless-NEO which switch please ?

    Excuse my ignorance here.

    I have my electrician replacing some 240 volt switches with the NEO wireless switches.

    I wish to switch 3 seperate low voltage lights. (already have c-bus transformers in roof that are dimmer c-bus capable)

    There is at present 3 seperate dimmers there now....

    Now from reading I know I need trailing edge.

    I understand the I need a 6 gang switch, as i need 2 switches for up down, on the dimmer ?/ CORRECT ??

    HERE LIES SOME OF MY CONFUSION. i THOUGHT A FOUR GANG SWITCH WOULD DO BUT FROM READING I SEE TWO BUTTONS CONTROL ONLY ONE LIGHT OR FUNCTION. SO I SEE I THINK THAT I NEED A 6 GANG ??

    Now do I need one channel or 2. I dont understand this part. ?

    I am going to use the wireless remote control, but besides lights will use it for nothing else.

    so i think i need a 6 gang trailing edge switch ? one or two channel ??

    Once again soory for the question but I have asked two electricians and they are not much help with this.

    thanks michael
Working...
X