Results 1 to 3 of 3

Thread: Worcester Bosch 24CDi RSF Problem

  1. #1
    Automated Home Lurker
    Join Date
    Aug 2006
    Posts
    4

    Default Worcester Bosch 24CDi RSF Problem

    Hi all, I am a corgi registerd engineer and was wondering if there are any other enginners that have come across the same problem on the above boiler. I was called out to this boiler with the fault lights telling me that there is a primary overheat. I have changed the sensors on both the central heating side and hot water side but still have the same fault. When the lights flash the pump pulses with the lights which indicate that the pump works and when you call for hot water the fan runs also which again indicates the fan is ok. The only other thing that happened when it first stopped running , it released alot of steam from the auto air vent. I am now assuming that it is the PCB but wanted to get some more opinions before i replace that expensive part!
    Many thanks in advance.
    Mark

  2. #2
    Moderator sunbeam's Avatar
    Join Date
    Feb 2006
    Location
    lancs
    Posts
    261

    Default Re: Worcester Bosch 24CDi RSF Problem

    can't say i've come across it, mymonkeylovin,

    but i'd go for the pump.

  3. #3
    Automated Home Lurker
    Join Date
    Sep 2006
    Location
    North Pole Alaska
    Posts
    1

    Default Re: Worcester Bosch 24CDi RSF Problem

    sounds like a flow switch . is there a ways or means to post JPEGS or drawings on this site... i notice the image option while posting....is that only for 6 KB?[/img]
    *~/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •