Correct CT100 crimp size

[osprey]

I bought a load of F-Type crimp plugs for CT100.
I bought these from CPC, and asked them to specify the correct crimp tool .. and they supplied an H Tools HT-336G ratchet crimp.

This has a Hex die size of 0.225" (6.48mm) ... and it is mangling the connectors, assume this die must be too small.

(I can't over-crimp as it's a ratchet type tool)

Does anyone know the correct Die size .. ? or could take a look at their CT100 tool.

If by any chance anyone has a correct H Tool crimp for F-Type CT100 connectors, then please let me know the model number.
Looking at the pack I suspect it is HT-336C2.

The F-Type plus are VF10-601/L from Vitelec

[David C]

Sorry for dragging up this old thread.
But I've had the same "issue" with CPC & VF10-601/L F-Types today.

On a Google for "VF10-601/L", this thread was the only real result.

Problem is that CPC are listing the wrong crimp tools for the VF10-601/L plug.
A call to Vitelec confirmed that they need a 8.23mm (0.324") hex crimp, but CPC are listing it for use with 6.48mm (0.255") tools.

In my case I ordered a HT-106A crimp tool, but it actually needs the HT-106H tool, which I've now ordered and the HT-106A will go back to CPC unless I can find another use for it.