I bought a load of F-Type crimp plugs for CT100.
I bought these from CPC, and asked them to specify the correct crimp tool .. and they supplied an H Tools HT-336G ratchet crimp.
This has a Hex die size of 0.225" (6.48mm) ... and it is mangling the connectors, assume this die must be too small.
(I can't over-crimp as it's a ratchet type tool)
Does anyone know the correct Die size .. ? or could take a look at their CT100 tool.
If by any chance anyone has a correct H Tool crimp for F-Type CT100 connectors, then please let me know the model number.
Looking at the pack I suspect it is HT-336C2.
The F-Type plus are VF10-601/L from Vitelec
I bought these from CPC, and asked them to specify the correct crimp tool .. and they supplied an H Tools HT-336G ratchet crimp.
This has a Hex die size of 0.225" (6.48mm) ... and it is mangling the connectors, assume this die must be too small.
(I can't over-crimp as it's a ratchet type tool)
Does anyone know the correct Die size .. ? or could take a look at their CT100 tool.
If by any chance anyone has a correct H Tool crimp for F-Type CT100 connectors, then please let me know the model number.
Looking at the pack I suspect it is HT-336C2.
The F-Type plus are VF10-601/L from Vitelec
Comment