Hi all,
System installed today, all runnng well.
Few questions-
I'm using the opentherm bridge to control the boiler - as I speak the boiler is off but the pump is still running, boiler water temp is 37c. And two of my hr92s have valves open about 40% but room temp has been reached. This looks a little odd to me, or is it doing its "thing".
One further question as the valves are only half open I'm getting a lot of water noise from the valves, it disappears if the valve is fully open. Pump is on its lowest setting. Normal too?
Many thanks
System installed today, all runnng well.
Few questions-
I'm using the opentherm bridge to control the boiler - as I speak the boiler is off but the pump is still running, boiler water temp is 37c. And two of my hr92s have valves open about 40% but room temp has been reached. This looks a little odd to me, or is it doing its "thing".
One further question as the valves are only half open I'm getting a lot of water noise from the valves, it disappears if the valve is fully open. Pump is on its lowest setting. Normal too?
Many thanks
Comment