I'm thinking about an evohome setup, however I want to check if I need to change my plubming or electrics first.
My current heating setup has a dual channel timer. One channel fires the oil boiler which is a gravity fed vented cylinder. The second channel triggers the CH pump. No valves are in the system, so to heat the house the timer has to have both the HW and CH come on at the same time.
If I get two evohome remote relays (probably one as part of the hot water kit), can the evohome controller be told to fire the HW boiler whenever the heating is on? Or do I need to make changes to my home heating install in order to have the CH remote relay close both circuits in hardware?
My current heating setup has a dual channel timer. One channel fires the oil boiler which is a gravity fed vented cylinder. The second channel triggers the CH pump. No valves are in the system, so to heat the house the timer has to have both the HW and CH come on at the same time.
If I get two evohome remote relays (probably one as part of the hot water kit), can the evohome controller be told to fire the HW boiler whenever the heating is on? Or do I need to make changes to my home heating install in order to have the CH remote relay close both circuits in hardware?
Comment